Changes to Bauder Inverted Upstand Insulation

Discontinuation of Bauder JFRI Upstand Board.

We have been informed by our supplier that they have taken the decision to discontinue the manufacture of our Bauder JFRI Upstand Board.

As a result, we will no longer be able to offer this product as part of our portfolio and anticipate that remaining stock will last only until the end of September 2021.

Outline of Changes to Bauder Inverted Upstand Insulation Options

Bauder currently offers the following standard options for inverted roof upstands:

  1. Bauder JFRI Upstand Board (Polystyrene)
  2. BauderROCK NC Upstand Board (Dense Mineral Wool Slab)
  3. Bauder XPS Upstand Board (Polystyrene)
  4. BauderGLAS Upstand Board (Cellular Glass)
  5. Bauder Warm Roof Upstand (Combustible and Non-Combustible Options)

Due to the withdrawal of Bauder JFRI Upstand Board, we are required to change our polystyrene inverted upstand insulation offering.

Changes to Bauder Upstand Insulation Specification and Sales

As outlined above, our supplier has discontinued the manufacture of Bauder JFRI Upstand Board.

Remaining stock is limited and, once exhausted, no further material will be available.

As a consequence of the withdrawal of this product, all future orders requiring a polystyrene-based upstand board will be fulfilled using our Bauder XPS Upstand Board.

The Product Data Sheet for Bauder XPS Upstand Board can be found at:

https://www.bauder.co.uk/technical-centre/products/insulation-products/bauder-xps-upstand-insulation https://www.bauder.co.uk/technical-centre/products/insulation-products/bauder-xps-upstand-insulation

All Bauder specifications currently within our system that incorporate Bauder JFRI Upstand Board will be updated to specify Bauder XPS Upstand Board.

Technically there is very little difference between the two products. However, there is a difference in appearance:

  • Bauder JFRI Upstand Board features a GRP facing.
  • Bauder XPS Upstand Board features a CP board facing.

If this change causes any issues, please contact either Andrew Harper or your local Bauder Area Technical Manager for further guidance.

There will be no cost penalty associated with this change on projects that have already been priced.

Non-Combustible Upstand Option

Where a non-combustible upstand board is required, we recommend considering the BauderROCK NC Upstand Board.

The Product Data Sheet is available at:

https://www.bauder.co.uk/technical-centre/products/insulation-products/bauderrock-nc-56mm-upstand-insulation https://www.bauder.co.uk/technical-centre/products/insulation-products/bauderrock-nc-56mm-upstand-insulation

Further Information

Hopefully the above has covered most of the questions you may have.

In the event that it hasn’t, please feel free to get in touch.

Andrew Harper
Hot Melt Product Manager
Tel: 07469 853264
Email:  [email protected]